Baquacil Sanitizer & Algistat (.5 gal)

Start Up:

1/2 gallon per 10,000 gallons of water to obtain 50 ppm Sanitizer level.

1 pt per 10,000 gallons to raise level by 10 ppm.

Freshly Filled and Dechlorinated Pools Start Up with Baquacil:

Note: If the pool water contains algae or is hazy, consult your Baquacil Dealer.

• Backwash or chemically clean your pool filter. Check pool pH; adjust to 7.2 to 7.6if necessary.
• Add Baquacil Sanitizer to give a content of 50 ppm (1/2 gallons product per 10,000 gallons of pool water.)
After 24 hours check pH and Baquacil Sanitizer concentration with Baquacil Test Strips and adjust if necessary.

Normal Pool Routine:

• Every week, check Baquacil Sanitizer concentration and pH.
• Maintain Baquacil Sanitizer concentration at about 50 ppm. If concentration falls 10 ppm or more, add a top-u dose.
• The level shod not be allowed to drop below 30 ppm. For example, to raise the Baquacil Sanitizer level 10 ppm, add 1 pint per 10,000 galloons of water.
• Consult your Baquacil Dealer for calculation instructions.

Problem Solving and supplemental pool information:

• Do not use in freestanding spas/hot tubs. Do not use in unpainted plaster pools previously exposed to metals, which may cause staining.
• Baquacil is not compatible with many detergents and some supllemental algicides (such as those based on copper).
• If algae development, cloudiness, or pool problems occur or additional information on water qualtiy is desired, consult your dealer.

Poly (Hexamethlenbiguanide) hydrochloride: 20%, Other Ingredients: 80%