BioGuard 1 Inch SilkGuard Tabs

$39.99

Brand BioGuard

Only Available in Store

Product Description

BioGuard SilkGuard Tabs are a revolutionary product exclusive to BioGuard and the first sanitizer made with SilkGuard Technology. These products differ from traditional chlorine because their special additives actually soften the water by attaching to hard water components and metal surfaces, which protects your pool equipment from scale, corrosion and staining, all while killing bacteria. These slow dissolving sanitizers contain SunShield Technology so that chlorine is protected from sunlight for long-lasting sanitation of pool water.

  • Product Dosage
      Routine Maintenance:

      16 oz per 10,000 gallons of water per week, or as needed.

      Start Up:

      16 oz per 10,000 gallons of water.

  • Directions
      Before you begin:
      1. Ensure all pool equipment is working properly. Adjust stabilizer levels to 40-50 ppm with stabilizer.
      2. Test your waters pH, alkalinity, and calcium hardness and adjust to the correct level. Adjust pH to 7.2-7.6, adjust alkalinity to 80-125ppm for plaster pools and 125-150 ppm for vinyl or fiberglass pools, adjust calcium hardness to 200-275 ppm for plaster pools and 175-225 for vinyl or fiberglass pools. Be sure to follow label directions when using other products as outline in directions for this product
      3. Check the free available chlorine level and adjust to 1-3 ppm by adding a granular chlorinating product.
      Start-Up/Initial Treatment:
      1. Check the free available chlorine level and adjust to 1-3 ppm by adding a granular chlorinating product.
      2. If using a feeder or floater add 16 oz. of this product per 10,000 gallons of pool water to feeder or floater and then test the free available chlorine level (allow water to circulate at leat 4 hours before testing). Adjust the feeder or floater following manufacturers instructions to establish a free chlorine level between 1-3 ppm.
      3. If using plastic skimmer add 16 oz. of this product per 10,000 gallons of water and test for free available chlorine (allow water to circulate at least 4 hours befor testing), adding more tablets as necessary to establish a free available chlorine level of 1-3 ppm.
      4. When free available chlorine level is adjusted to 1-3 ppm, add the algaecide appropriate to your needs.
      Routine Maintenance:

      Add 16 oz. of this product per 10,000 gallons of water per week, or as often as needed, to the floater, feeder or skimmer to maintain a constant free available chlorine level of 1-3 ppm.

  • Ingredients
      Trichloro-s-triazinetrione: 94.05%, Other Ingredients: 5.95%, Available Chlorine: 84.65%

  • *Chemicals can only be shipped via UPS or FEDEX ground service to the 48 contiguous United States

    }