SpaGuard Brominating Concentrate


Brand SpaGuard

In Stock: 26 left

Product Description

SpaGuard's Brominating Concentrate provides spa owners with a one-step bacteria fighter, which is applied simply by adding a few granular pellets to spa water while the pump is running. Brominating Concentrate is pH neutral, so it will not affect your spas pH or alkalinity levels as well as needing no pre-treatments or activators to begin working. This concentrate will eliminate odors and other undesirable compounds, simplifying spa maintenance while creating a healthier and more comfortable spa environment.

  • Product Dosage
      Routine Maintenance:

      1 tsp per 200 gallons of water. Repeat until bromine residual of 3-6 ppm is reached.

      Super Oxidation:

      4 tsp per 200 gallons of water.

      Algae Treatment:

      4 tsp per 200 gallons of water.

  • Directions
      Pre Treatment:
      1. Ensure all spa and tub equipment is working properly.
      2. Backwash or clean the filter system following manufacturers directions.
      3. Adjust pH to between 7.2-7.6.
      4. When using other products as outline in the directions for this product, always follow directions on those products.
      5. Spas should be drained and cleaned at least every 60 days or whenever water becomes difficult to manage or keep clear.
      6. Both oils, salts and lotions should not be used unless specifically formulated for use in spas and hot tubs as they can lead to cloudy water.
      1. Add 1 level teaspoon of this product per 200 gallons of water with circulation system operating.
      2. Test for available bromine and repeat sanitation dose at 15 to 20 minute intervals until a residual of 3-6 ppm is established.
      3. It is recommended that a test kit be used regularly to determine when additional doses are needed to maintain a residual of 3-6 ppm.
      1. A super-oxidation dose is needed to destroy water soluble organic wastes
      2. This may be needed on a daily basis in a heavily used spa or once a week in a moderatly used spa.
      3. Add 4 teaspoons of this product per 200 gallons of water with circulation system operating.
      Treatment of Visible Algae:
      1. If visible algae is present, brush spa surfaces and start circulation system operating, without air ingjection if possible.
      2. Add 4 teaspoons of this product for each 200 gallons of water.
      3. Allow system to ciculate 15 to 20 minutes.
      4. Treatment may be repeated in 24 hours if algae is still present.
  • Ingredients
      Sodium Dichloro-s-Triazinetrione: 82.5%, Other Ingredients: 14.7%

*Chemicals can only be shipped via UPS or FEDEX ground service to the 48 contiguous United States

Recently Viewed Items


Call for Price

I agree to my email being stored and used to receive the newsletter.